TM Profs has joined our worldwide channel for promotion of Capvidia software products in the Netherlands.
FlowVision CFD software, being product of Capvidia NV, is being represented by various value added resellers throughout the world. Today, we are glad to announce that a new partner has joined our channel. TM Profs, having headquarters located in Eindhoven, has started working as an official FlowVision reseller in the Netherlands region.
Please check contacts section of our web-site where information about all of our resellers is listed and feel free to reach any reseller in your territory or in your language. As a whole of extended FlowVision family, we are always more than pleased to help you with demonstration of our software and integration of our capabilities into your engineering design cycles.
Small and medium-sized companies are interested in use of engineering software and high-performance computers. The EU’s project CloudFlow provides the both possibilities. 46 partner organizations from 13 European countries are working together in this project coordinated by the Fraunhofer Institute for Computer Graphics Research IGD. The project provides access to the numerical simulation software for small and medium-sized companies with using cloud computing on the CloudFlow platform. In this solution the existing servers provides high computational performance for solving difficult problems (High Performance Computing, HPC). Customers pay for computational power and the software only when they use these resources via Internet. Use of cloud technologies allows the customers to:
- use the software and infrastructure of high performance computations in a cost-effective way
- solve high dimension problems (complex part assemblies)
- carry out several optimization projects on supercomputers in a parallel mode
May 23 – 25, 2016, Boston – Capvidia is participating as an active sponsor of the Simulation Community Conference “Science in the Age of Experience” organized by Dassault Systemes SIMULIA.
During the Conference; the unique integration of FlowVision and Abaqus for the solution of FSI (fluid-structure interactions) problems will be demonstrated and Capvidia will show-up at different activities:
- Capvidia booth will be open to visitors in the Exhibition area during the Conference days…
- Presentations about FlowVision during ‘Integrated Solutions’ sessions:
- FlowVision – Abaqus Integrated FSI Solutions
- Our Contribution to Living Heart Project by SIMULIA
- Hands-On Software Demonstration; A Sample FSI Application with FlowVision and Abaqus
This special event will be held at the Boston Marriott Copley Place in May 23-25, 2016. For up-to-date information and detailed agenda, please visit event page on SIMULIA website.
Capvidia, as a member of Automation Alley, is organizing (8th June) a seminar where participants are expected to learn how to take advantage of FlowVision's unique capabilities such as automatic meshing with associative CAD geometry, use of moving and flexible bodies, and solving heavily coupled multi-physics co-simulations with SIMULIA Abaqus.
Akana Engineering has joined our worldwide channel for promotion of Capvidia software products in Turkey.
FlowVision CFD software, being product of Capvidia NV, is being represented by various value added resellers throughout the world. Today, we are glad to announce that a new partner has joined our channel. Akana Engineering, having headquarters located in Ankara, has started working as an official FlowVision reseller in Turkey region.
Please check contacts section of our web-site where information about all of our resellers is listed and feel free to reach any reseller in your territory or in your language. As a whole of extended FlowVision family, we are always more than pleased to help you with demonstration of our software and integration of our capabilities into your engineering design cycles.
C2ES Korea has joined our worldwide channel for promotion of Capvidia software products in South Korea.
FlowVision CFD software, being product of Capvidia NV, is being represented by various value added resellers throughout the world. Today, we are glad to announce that a new partner has joined our channel. C2ES Korea, having headquarters located in Seoul, has started working as an official FlowVision reseller in South Korea region.
Please check contacts section of our web-site where information about all of our resellers is listed and feel free to reach any reseller in your territory or in your language. As a whole of extended FlowVision family, we are always more than pleased to help you with demonstration of our software and integration of our capabilities into your engineering design cycles.
TESIS participated as a CAE software developer in the Development Forum, hosted on September 23 in Moscow where various engineering software solutions were presented by Russian developers. The presentations and proceedings covered all stages of engineering production cycle; system design, PLM, engineering calculations and analysis, 2D and 3D modeling, CNC programming and monitoring.
TESIS company participated in the annual conference SCC2015 (SIMULIA Community Conference), held in Berlin, Germany on 18-21 May.
TESIS company stand was opened in the exhibition of our partner, Dassault Systems, with special focus on strong cooperation of software packages Abaqus and FlowVision. During the conference, our stand aroused significant visitor interest with the special subject: "Simulation of Strongly Coupled Fluid-Structure Interactions (FSI) using Abaqus and FlowVision”.
From Left to Right; Andrey Aksenov (TESIS, CTO), Tomasz Luniewski (Capvidia, General Manager) & Bernard Charles (Dassault Systems, CEO)
New release of FlowVision version 3.09.04 build 07.05.2015
This release contains the following updates and improvements:
- 64-bit Pre-Postprocessor and Viewer allow you to work with geometric models, which contain very much number of facets.
- In the Formula Editor new operations were added, which allow you to define local values on a surface of a Boundary Condition via values from centers of adjacent cells.
- Automatic generator of the initial grid was substantially revised. This enables stable work with complex-shaped geometric models with large number of facets.
- Limiters are now moved from the Advanced settings object into a new object Limiters in the project tree.
Read more about the changes in "What's New" of the ReadMe file in the archive of distribution FlowVision 3.09.04 and in the user manual.
Release you can find in Download section.